What’s reason of your outboard motor engine won’t start(4-stroke)

From CUKUSIN.COM.

If you FYI. please noted it.

• Possible Reason 1:

The chock position inaccuracy

Solution Method:

1. When the hot machine start , the chock hand handle move to the open position.
2. When the cool machine start, the chock hand handle move to the close position.

• Possible Reason 2:

Have no the gasoline or oil road to stop

1. If the gasoline run out, please to increase the fresh admixture oil.
2. If did not press the carburetor oil feeder, please press to move.
3. If the fuel tank or the oil road of inside has the no fresh admixture oil or the abnormality thing ,please finish putting the oil in the carburetor and the fuel tank out, and clearance the abnormality thing, then fresh admixture oil of affiliation.

• Possible Reason 3:

The spark plug or the magnetoelectricity machine

1. If the spark plug damage in response to on time replace the spark plug.
2. If the spark cleft is not appropriate or the spark plug accumulates the carbon, should on time adjust the spark plug cleft and tidy up the carbon.
3. If the spark plug electrode cleft was mixed with the oil to immerse, should take down the spark plug, wipe to dry and install again.
4. If high pressure line blowout or loose, please replace or reinforce.
5. If the stator to move, should be in time adjustment and reinforce.
6. If the high-pressure hat and the spark the plug contact is bad, should rotate the spark plug hat tightly.